VFS-1 BMC Mod Version

 

VFS-1 BMC Modified Version #40052

The BMC Mod Version was developed for the optimization of modified racing. Internally the FET’s have been modified for the best low end response and control for smooth acceleration while keeping the mid throttle punch and high end speed. Extenally the ESC will now come supplied with an external capacitor, heat sink and fan.

This improvement was proven by factory support driver Josh Cyrul (CEFX) by taking the 2010 ROAR Carpet Nationals championship for 1/12th modified and IIC 1/12th TQ & championship titles. Josh’s profile for 1/12th has been loaded into the ESC.

*The use of the new BMC 2010 software is required for 1/12th scale to use the 1S Lipo voltage cut off setting. Using an external receiver battery pack and disconnecting the red wire from the ESC to the receiver is required for 1/12th scale usage.

BMC Power Capacitor #45524

External power capacitor included with the BMC mod verion is now available as an option.

BMC 2010 software is also now available for download here .

By | 2017-05-22T17:49:15+00:00 January 13th, 2011|ESC Brushless|Comments Off on VFS-1 BMC Mod Version