Congrats to factory driver Jared Tebo for taking the 2017 ROAR 1/8 Nitro Buggy title! Jared would drive his Kyosho buggy to the top spot using the EX-RR radio and RSx3 Power HC servos! This is his 2nd ROAR Buggy title and 17th ROAR National title.
Congrats to KO factory driver JJ Wang for taking the double TQ and win for 1/10 Sedan and 1/8th Open at the 2016 ROAR nitro on-road nationals. JJ would collect his first two ROAR national titles in the same weekend. The EX-2 platform has proven that it's a competitor at any level of competition. [...]
Silicone Wire2 is the new wire introduced in different gauges. Available in black or red and 10GA, 12GA or 16GA and about 50cm in length.No.75110 - 10GABlackNo.75111 - 10GA RedNo.75112 - 12GA BlackNo.75113 - 12GA RedNo.75114 - 16GA BlackNo.75115 - 16GA Red
Advantage Capacitor B (No.45559) was designed for use with brushless ESC's using boost and turbo for 13.5 and 17.5 motors. The discharge rate closely matches the need for these classes to get a faster maximum speed. Get it here. For non-boost classes we recommend using the Advantage Capacitor A.
Advantage Capacitor A (No.45558) was designed for non-boost brushless spec classes or brushless modified classes with very little turbo. During a race the heat build up in motor and ESC can cause a slower performance in the later half of the race. The effect of the capacitor can help in the suppression of the heat [...]
RSx one10 Type-S (No.30120) is a new low-profile servo targeting a lower price range but with high performance. The servo can be used at 6v or 7.4v and includes metal gears, heat-sink middle case, core-less motor and dual ball bearings. More info on the servo specs can be found here.
Exif_JPEG_PICTURE All black servo wire (No.36516) designed with more strands of wire inside each silicone wrap that is capable of handling high voltage while still being very flexible. This accessory is for those looking to complete a clean look for their servo installations. Order here.
The Servo Model Selector (No.61029) allows for up to 5 different model pre-set memories stored in the servo to be selected. Servos that are compatible are the RSx/RSx2/BSx2 servos. Creating the pre-sets in the servo can be saved to your servo by using the ICS USB adapter in advance. (BSx Standard and PDS servos are [...]
The new BSx2 one10 Grasper (No.30207) was designed for a great steering feel like tires grasping to the road for 1/10 on-road cars!Using the BSx system, the redesign of the motor drive calculations produced a powerful linear steering feeling. The "Holding Power" was the most important development in this servo to feel the torque when [...]
Congrats to factory driver Donny Lia for taking the TQ and Championship title of the 1/12 Modified class at the 2016 ROAR Carpet Nationals in St. Louis hosted by ProlevelRC track. Other KO drivers; Mike Pulfer would finish 4th, Chris Hillier 5th, Andrew Doherty 6th and Drew Ellis 8th. Donny used the EX-2 system with [...]