| Input Voltage: | Min 5.0V / Max 10.0V |
| Instant maximum current: | 14.0A |
| Continuous maximum current: | 8A |
| Current self consumption: | Maximum 1mA in standby. (when all of 7 segment LED lights maximum 10mA) |
| Size: | 39.2×17.5×9.5mm (Excluding protrusions) |
| Cable length(input/Battery): | 80mm |
| Cable length(Output/Receiver): | 180cm |
| Weight: | 10.0g |
Electrical Switch 3
This is Electorical controled Power switch unut. The CPU remembers the current power state ON/OFF. It prevents the power supply from turning off due to poor contact of the connector by the vibration in the engine car or momentary or voltage drop at overload.
AGS restrains vibration of servo!
Voltage displayed by the 7 segment LED.
Built in 7 segment LED to easily see the battery voltage monitoring. The current battery voltage is displayed for 5 seconds one the power is turned ON. After 5 seconds, the minimum voltage is always displayed.
Translucent case
Since we adopted a translucent case, we can judge the ON/OFF state of the power supply from the side of the switch. Also, the Li-po mode state can easily be seen.