Speed: | 0.09s@60°(7.4V) 0.10s@60°(6.0V) |
Torque: | 12.5kg-cm(7.4V) 11.8kg-cm(6.0V) |
Size: | 40.5 x 26 x 21 mm |
Weight: | 53.3 g |
RSx3 one10 Flection (HCS, Low Profile, Digital, Steering Type)
The RSx3 one10 Flection is designed as a steering for electric or steerin or throttle nitro 1/10th scale vehicles. This servo comes ready to operate at 6V or 7.4V. The next core-less more draws less current allowing for less battery draw and BEC freindly but has greater holding strength. Giving you better handling performance to make turns on the track. Five model memories are set in the servo so you can select which setting benifits your requirement. Further programming can be done via PC with ICS USB HS adapter and model memories can be changed using the Servo Model Selector both sold separately. *This servo can use HCS and requires the use of a HCS receiver when HCS is turned on in the receiver.
The following MODEL memories are pre-set in the servo:
MODEL 1 – EP on-road (default)
MODEL 2 – EP on-road carpet
MODEL 3 – EP on-road low grip situations
MODEL 4 – 1/10 Nitro car steering
MODEL 5 – 1/10 Nitro car throttle