Speed: | 0.09s@60°(7.4V) 0.10s@60°(6.0V) |
Torque: | 12.5kg-cm(7.4V) 11.8kg-cm(6.0V) |
Size: | 40.5 x 26 x 21 mm |
Weight: | 53.3 g |
RSx3 one10 Flection Type-T (HCS, Low Profile, Digital, Steering Type)
The RSx3 one10 Flection Type-T is similar to the regular Flection but is built for use with low BEC speed controller like Tamiya’s RTR ESC’s.. This servo comes ready to operate at 6V or 7.4V. The next core-less more draws less current allowing for less battery draw and BEC freindly but has greater holding strength. Five model memories are set in the servo so you can select which setting benifits your requirement. Further programming can be done via PC with ICS USB HS adapter and model memories can be changed using the Servo Model Selector both sold separately. *This servo can use HCS and requires the use of a HCS receiver when HCS is turned on in the receiver.
The following MODEL memories are pre-set in the servo:
MODEL 1 – Aspault High Grip
MODEL 2 – Carpet Low Grip (default)
MODEL 3 – Tamiya World Championship Blue Carpet
MODEL 4 – Tamiya Challenge Kakegawa Circuit
MODEL 5 – Aspault Low Grip