VFS-1 BMC v1.5

By | 2015-04-26T16:44:23+00:00 April 23rd, 2009|What's New|

VFS-1 BMC v1.5 #40051Version 1.5 of the BMC has proved itself at the ROAR Carpet Nationals with 3 TQ positions and 2 wins in it's first outting. Five new preset programs and now you can adjust the drag brake through the setup switch in 10% increments (OFF-50%). All specs are the same as the original [...]

Comments Off on VFS-1 BMC v1.5

PDS-3101 ICS

By | 2017-05-22T17:49:21+00:00 December 4th, 2008|What's New|

VOLTAGE:6VTORQUE:62.1 ozSPEED: 0.09 S @ 60°BEARINGS:NoLEAD CONNECTOR: GOLD PLATEDGEARS:METALWEIGHT: 18.2 gSIZE: 30x12x26 mm Features KO's digital technology including ICS which means it can also be programmed.The PDS-3101 ICS Digital Micro servo has metal gears and is designed for 1/16th or similar scale vehicles. This is our high speed type servo, great for those looking to upgrade to a digital [...]

Comments Off on PDS-3101 ICS

PDS-2512 ICS

By | 2017-05-22T17:49:22+00:00 December 4th, 2008|What's New|

VOLTAGE:6VTORQUE:149.1 ozSPEED: 0.16 S @ 60°BEARINGS:YES, DBLLEAD CONNECTOR: GOLD PLATEDGEARS:METALWEIGHT: 46.5 gSIZE: 41x21x31.8 mm Great budget minded servo that features KO's digital technology including ICS which means it can also be programmed.The PDS-2512 ICS Digital Mid Profile servo comes with all metal gears. This new size is in-between our low profile and standard size servo case. [...]

Comments Off on PDS-2512 ICS

PDS-2511 ICS

By | 2017-05-22T17:49:23+00:00 December 4th, 2008|What's New|

VOLTAGE:6VTORQUE:132.5 ozSPEED: 0.13 S @ 60°BEARINGS:YES, DBLLEAD CONNECTOR: GOLD PLATEDGEARS:METALWEIGHT: 46.5 gSIZE: 41x21x31.8 mmGreat budget minded servo that features KO's digital technology including ICS which means it can also be programmed.The PDS-2511 ICS Digital Mid Profile servo comes with all metal gears. This new size is in-between our low profile and standard size servo case. This [...]

Comments Off on PDS-2511 ICS

Aluminum Upper Case #35024

By | 2015-04-26T16:54:12+00:00 August 20th, 2008|What's New|

Machined aluminum upper case for KO servos PDS-2367, PDS-2368 and PDS-2386. This is the ultimate servo top for the most demanding applications.  This case will help in the prevention of the servo ears/upper case from breaking, hold the gear pins place better and aid in some cooling of the servo.

Comments Off on Aluminum Upper Case #35024

VFS-1 BMC

By | 2017-05-22T17:49:26+00:00 June 27th, 2008|What's New|

VFS-1 BMC Brushless Motor Controller #40050 (December 8, 2008) The VFS-1 BMC uses KO PROPO's patented VFS technology.Five preprogrammed settings (Power, Mild, Smooth, Touring Car, Buggy)Overheat & Current Overload protection equippedMotor Limit: 4.5T (with heat sink and fan installed, 2.5T)Size: 33.4 x 37.0 x 16.8 (mm)  Weight: 30.8gMax Peak Current: 3120A (FET Specifications)Max Continuous Current: 780A (FET [...]

Comments Off on VFS-1 BMC

EX-1 UR

By | 2017-05-22T17:49:27+00:00 April 24th, 2008|What's New|

A new CPU with a forum philosophy that exceeds time. High-speed experience directly at your fingertip!The EX-1 UR features a newly designed super high speed CPU with a faster Ultra Response Mode (UR) along with Advanced-Super-Normal modes, 30 model memory, super stable performance of the super module, quicker response with the smaller diameter wheel & [...]

Comments Off on EX-1 UR

PDS-951 ICS Servo #30048

By | 2015-04-26T17:10:20+00:00 April 24th, 2008|What's New|

The new PDS-951 ICS (1/12th scale servo) servo is a new improvement over the previous PDS-949 ICS. The updates to the servo include, new amplifier and programming whie the size of the new PDS-951 is the same. ICS programming can also be set via PC interface or hand held programmer (not included).Speed: 0.09 sec @ [...]

Comments Off on PDS-951 ICS Servo #30048