| Speed: | 0.11s @ 60°(7.4V) 0.13s @ 60°(6.0V) |
| Torque: | 31.6 kg-cm(7.4V) 26.3 kg-cm(6.0V) |
| Size: | 41 x 37.5 x 20 mm |
| Weight: | 70.5 g |
The RSx3 Response H.C. (Hard Case) is designed for ultimate rigidity while providing high torque and compatible with HCS. This servo comes ready to operate at 6V or 7.4V. Programming of this servo will also be available via PC for further fine tuning and includes a few pre-programmed settings. Recommended for use on steering for 1/8th off-road truggy, throttle for 1/8th off-road buggy/truggy and throttle for 1/8th on-road.
| Speed: | 0.06s @60°(7.4V) 0.07s @60°(6.0V) |
| Torque: | 17.6 kg-cm(7.4V) 14.5 kg-cm(6.0V) |
| Size: | 41 x 37.5 x 20 mm |
| Weight: | 70.5 g |
The RSx3 Response H.C. (Hard Case) is designed for ultimate rigidity while still providing high speed and compatible with HCS. This servo comes ready to operate at 6V or 7.4V.Programming of this servo will also be available via PC for further fine tuning. Recommended for use on steering for 1/8th off-road buggy, 1/8th on-road and 1/10th GP on-road.
| Speed: | 0.06s @60°(7.4V) 0.07s @60°(6.0V) |
| Torque: | 17.6 kg-cm(7.4V) 14.5 kg-cm(6.0V) |
| Size: | 41 x 38 x 20 mm |
| Weight: | 65.6 g |
RSx3 Response (Digital Servo, Speed Type)
The RSx3 Response is designed to provide high speed and compatible with HCS. This servo comes ready to operate at 6V or 7.4V.
Programming of this servo will also be available via PC for further fine tuning.
Recommended for use on steering for 1/8th off-road buggy, 1/8th on-road and all 1/10th scale vehicles.
| Speed: | 0.11s @ 60°(7.4V) 0.13s @ 60°(6.0V) |
| Torque: | 31.6 kg-cm(7.4V) 26.3 kg-cm(6.0V) |
| Size: | 41 x 38 x 20 mm |
| Weight: | 65.6 g |
RSx3 Power (Digital Servo, Torque Type)
The RSx3 Power is designed to provide high torque and is compatible with HCS. This servo comes ready to operate at 6V or 7.4V.
Programming of this servo will also be available via PC for further fine tuning and includes a few pre-programmed settings.
Recommended for use on steering for 1/8th off-road truggy, throttle for 1/8th off-road buggy/truggy and throttle for 1/8th on-road.
| Speed: | 0.11s @ 60°(7.4V) 0.13s @ 60°(6.0V) |
| Torque: | 31.6 kg-cm(7.4V) 26.3 kg-cm(6.0V) |
| Size: | 41 x 37.5 x 20 mm |
| Weight: | 70.5 g |
The RSx3 Response H.C. (Hard Case) is designed for ultimate rigidity while providing high torque and compatible with HCS. This servo comes ready to operate at 6V or 7.4V. Programming of this servo will also be available via PC for further fine tuning and includes a few pre-programmed settings. Recommended for use on steering for 1/8th off-road truggy, throttle for 1/8th off-road buggy/truggy and throttle for 1/8th on-road.
| Speed: | 0.06s @60°(7.4V) 0.07s @60°(6.0V) |
| Torque: | 17.6 kg-cm(7.4V) 14.5 kg-cm(6.0V) |
| Size: | 41 x 37.5 x 20 mm |
| Weight: | 70.5 g |
The RSx3 Response H.C. (Hard Case) is designed for ultimate rigidity while still providing high speed and compatible with HCS. This servo comes ready to operate at 6V or 7.4V.Programming of this servo will also be available via PC for further fine tuning. Recommended for use on steering for 1/8th off-road buggy, 1/8th on-road and 1/10th GP on-road.
| Speed: | 0.06s @60°(7.4V) 0.07s @60°(6.0V) |
| Torque: | 17.6 kg-cm(7.4V) 14.5 kg-cm(6.0V) |
| Size: | 41 x 38 x 20 mm |
| Weight: | 65.6 g |
RSx3 Response (Digital Servo, Speed Type)
The RSx3 Response is designed to provide high speed and compatible with HCS. This servo comes ready to operate at 6V or 7.4V.
Programming of this servo will also be available via PC for further fine tuning.
Recommended for use on steering for 1/8th off-road buggy, 1/8th on-road and all 1/10th scale vehicles.
| Speed: | 0.11s @ 60°(7.4V) 0.13s @ 60°(6.0V) |
| Torque: | 31.6 kg-cm(7.4V) 26.3 kg-cm(6.0V) |
| Size: | 41 x 38 x 20 mm |
| Weight: | 65.6 g |
RSx3 Power (Digital Servo, Torque Type)
The RSx3 Power is designed to provide high torque and is compatible with HCS. This servo comes ready to operate at 6V or 7.4V.
Programming of this servo will also be available via PC for further fine tuning and includes a few pre-programmed settings.
Recommended for use on steering for 1/8th off-road truggy, throttle for 1/8th off-road buggy/truggy and throttle for 1/8th on-road.
| Speed: | 0.08s@60°(7.4V) 0.09s@60°(6.0V) |
| Torque: | 8.2kg-cm(7.4V) 7.0kg-cm(6.0V) |
| Size: | 40.5 x 26.5 x 21 mm |
| Weight: | 42.1 g |
RSx one10 Type-S (Low Profile, Digital, Steering Type)
The RSx one10 Type-S is designed as a budget servo with high performance specs for electric or nitro 1/10th scale vehicles. This servo comes ready to operate at 6V or 7.4V. Programming of this servo will also be available via PC for further fine tuning.
| Speed: | 0.09s@60°(7.4V) 0.10s@60°(6.0V) |
| Torque: | 10.8kg-cm(7.4V) 8.0kg-cm(6.0V) |
| Size: | 40.5 x 26 x 21 mm |
| Weight: | 51.0 g |
The BSx3 one10 Grasper is designed as a steering for electric or nitro 1/10th scale vehicles. This servo comes ready to operate at 6V or 7.4V. Model memory 1 is programmed as the power setting, Model 2 is the standard setting and the factory default. Further programming can be done via PC with ICS USB HS adapter and model memories can be changed using the Servo Model Selector both sold separately. *This servo can use HCS and requires the use of a HCS receiver when HCS is turned on in the receiver.
| Speed: | 0.09s@60°(7.4V) 0.10s@60°(6.0V) |
| Torque: | 12.5kg-cm(7.4V) 11.8kg-cm(6.0V) |
| Size: | 40.5 x 26 x 21 mm |
| Weight: | 53.3 g |
The RSx3 one10 Flection is designed as a steering for electric or steerin or throttle nitro 1/10th scale vehicles. This servo comes ready to operate at 6V or 7.4V. The next core-less more draws less current allowing for less battery draw and BEC freindly but has greater holding strength. Giving you better handling performance to make turns on the track. Five model memories are set in the servo so you can select which setting benifits your requirement. Further programming can be done via PC with ICS USB HS adapter and model memories can be changed using the Servo Model Selector both sold separately. *This servo can use HCS and requires the use of a HCS receiver when HCS is turned on in the receiver. The following MODEL memories are pre-set in the servo: MODEL 1 - EP on-road (default) MODEL 2 - EP on-road carpet MODEL 3 - EP on-road low grip situations MODEL 4 - 1/10 Nitro car steering MODEL 5 - 1/10 Nitro car throttle
| Speed: | 0.08s@60°(7.4V) 0.09s@60°(6.0V) |
| Torque: | 13.3kg-cm(7.4V) 10.5kg-cm(6.0V) |
| Size: | 40.5 x 26 x 21 mm |
| Weight: | 48.0 g |
BSx3 one10 Response (Low Profile, Digital, Speed Type)
The BSx3 one10 Response is designed for electric or nitro 1/10th scale vehicles and HCS compatible. This servo comes ready to operate at 6V or 7.4V. Programming of this servo will also be available via PC or ICS setting card for the RSx for further fine tuning.
| Speed: | 0.09s@60°(7.4V) 0.10s@60°(6.0V) |
| Torque: | 12.5kg-cm(7.4V) 11.8kg-cm(6.0V) |
| Size: | 40.5 x 26 x 21 mm |
| Weight: | 53.3 g |
The RSx3 one10 Flection Type-T is similar to the regular Flection but is built for use with low BEC speed controller like Tamiya's RTR ESC's.. This servo comes ready to operate at 6V or 7.4V. The next core-less more draws less current allowing for less battery draw and BEC freindly but has greater holding strength. Five model memories are set in the servo so you can select which setting benifits your requirement. Further programming can be done via PC with ICS USB HS adapter and model memories can be changed using the Servo Model Selector both sold separately. *This servo can use HCS and requires the use of a HCS receiver when HCS is turned on in the receiver. The following MODEL memories are pre-set in the servo: MODEL 1 - Aspault High Grip MODEL 2 - Carpet Low Grip (default) MODEL 3 - Tamiya World Championship Blue Carpet MODEL 4 - Tamiya Challenge Kakegawa Circuit MODEL 5 - Aspault Low Grip
| Speed: | 0.10s@60°(7.4V) 0.12s@60°(6.0V) |
| Torque: | 17.8kg-cm(7.4V) 15.2kg-cm(6.0V) |
| Size: | 40.5 x 26 x 21 mm |
| Weight: | 48.0 g |
BSx3 one10 Power (Low Profile, Digital, Torque Type)
The BSx3 one10 Power is designed for electric or nitro 1/10th scale vehicles and HCS compatible. This servo comes ready to operate at 6V or 7.4V. Programming of this servo will also be available via PC or ICS setting card for the RSx for further fine tuning.
| Speed: | 0.07s@60°(7.4V) 0.09s@60°(6.0V) |
| Torque: | 9.0kg-cm(7.4V) 7.0kg-cm(6.0V) |
| Size: | 41 x 25.5 x 21 mm |
| Weight: | 51.0 g |
RSx3 one10 Response (Low Profile Digital Servo, Speed Type)
The RSx3 one10 Response is designed for electric or nitro 1/10th scale vehicles and compatible with HCS. This servo comes ready to operate at 6V or 7.4V. Programming of this servo will also be available via PC or ICS setting card for the RSx for further fine tuning.
| Speed: | 0.08s@60°(7.4V) 0.09s@60°(6.0V) |
| Torque: | 8.2kg-cm(7.4V) 7.0kg-cm(6.0V) |
| Size: | 40.5 x 26.5 x 21 mm |
| Weight: | 42.1 g |
RSx one10 Type-S (Low Profile, Digital, Steering Type)
The RSx one10 Type-S is designed as a budget servo with high performance specs for electric or nitro 1/10th scale vehicles. This servo comes ready to operate at 6V or 7.4V. Programming of this servo will also be available via PC for further fine tuning.
| Speed: | 0.09s@60°(7.4V) 0.10s@60°(6.0V) |
| Torque: | 10.8kg-cm(7.4V) 8.0kg-cm(6.0V) |
| Size: | 40.5 x 26 x 21 mm |
| Weight: | 51.0 g |
The BSx3 one10 Grasper is designed as a steering for electric or nitro 1/10th scale vehicles. This servo comes ready to operate at 6V or 7.4V. Model memory 1 is programmed as the power setting, Model 2 is the standard setting and the factory default. Further programming can be done via PC with ICS USB HS adapter and model memories can be changed using the Servo Model Selector both sold separately. *This servo can use HCS and requires the use of a HCS receiver when HCS is turned on in the receiver.
| Speed: | 0.09s@60°(7.4V) 0.10s@60°(6.0V) |
| Torque: | 12.5kg-cm(7.4V) 11.8kg-cm(6.0V) |
| Size: | 40.5 x 26 x 21 mm |
| Weight: | 53.3 g |
The RSx3 one10 Flection is designed as a steering for electric or steerin or throttle nitro 1/10th scale vehicles. This servo comes ready to operate at 6V or 7.4V. The next core-less more draws less current allowing for less battery draw and BEC freindly but has greater holding strength. Giving you better handling performance to make turns on the track. Five model memories are set in the servo so you can select which setting benifits your requirement. Further programming can be done via PC with ICS USB HS adapter and model memories can be changed using the Servo Model Selector both sold separately. *This servo can use HCS and requires the use of a HCS receiver when HCS is turned on in the receiver. The following MODEL memories are pre-set in the servo: MODEL 1 - EP on-road (default) MODEL 2 - EP on-road carpet MODEL 3 - EP on-road low grip situations MODEL 4 - 1/10 Nitro car steering MODEL 5 - 1/10 Nitro car throttle
| Speed: | 0.08s@60°(7.4V) 0.09s@60°(6.0V) |
| Torque: | 13.3kg-cm(7.4V) 10.5kg-cm(6.0V) |
| Size: | 40.5 x 26 x 21 mm |
| Weight: | 48.0 g |
BSx3 one10 Response (Low Profile, Digital, Speed Type)
The BSx3 one10 Response is designed for electric or nitro 1/10th scale vehicles and HCS compatible. This servo comes ready to operate at 6V or 7.4V. Programming of this servo will also be available via PC or ICS setting card for the RSx for further fine tuning.
| Speed: | 0.09s@60°(7.4V) 0.10s@60°(6.0V) |
| Torque: | 12.5kg-cm(7.4V) 11.8kg-cm(6.0V) |
| Size: | 40.5 x 26 x 21 mm |
| Weight: | 53.3 g |
The RSx3 one10 Flection Type-T is similar to the regular Flection but is built for use with low BEC speed controller like Tamiya's RTR ESC's.. This servo comes ready to operate at 6V or 7.4V. The next core-less more draws less current allowing for less battery draw and BEC freindly but has greater holding strength. Five model memories are set in the servo so you can select which setting benifits your requirement. Further programming can be done via PC with ICS USB HS adapter and model memories can be changed using the Servo Model Selector both sold separately. *This servo can use HCS and requires the use of a HCS receiver when HCS is turned on in the receiver. The following MODEL memories are pre-set in the servo: MODEL 1 - Aspault High Grip MODEL 2 - Carpet Low Grip (default) MODEL 3 - Tamiya World Championship Blue Carpet MODEL 4 - Tamiya Challenge Kakegawa Circuit MODEL 5 - Aspault Low Grip
| Speed: | 0.10s@60°(7.4V) 0.12s@60°(6.0V) |
| Torque: | 17.8kg-cm(7.4V) 15.2kg-cm(6.0V) |
| Size: | 40.5 x 26 x 21 mm |
| Weight: | 48.0 g |
BSx3 one10 Power (Low Profile, Digital, Torque Type)
The BSx3 one10 Power is designed for electric or nitro 1/10th scale vehicles and HCS compatible. This servo comes ready to operate at 6V or 7.4V. Programming of this servo will also be available via PC or ICS setting card for the RSx for further fine tuning.
| Speed: | 0.07s@60°(7.4V) 0.09s@60°(6.0V) |
| Torque: | 9.0kg-cm(7.4V) 7.0kg-cm(6.0V) |
| Size: | 41 x 25.5 x 21 mm |
| Weight: | 51.0 g |
RSx3 one10 Response (Low Profile Digital Servo, Speed Type)
The RSx3 one10 Response is designed for electric or nitro 1/10th scale vehicles and compatible with HCS. This servo comes ready to operate at 6V or 7.4V. Programming of this servo will also be available via PC or ICS setting card for the RSx for further fine tuning.
| Speed: | 0.08s@60°(7.4V) 0.09s@60°(6.0V) |
| Torque: | 8.2kg-cm(7.4V) 7.0kg-cm(6.0V) |
| Size: | 40.5 x 26.5 x 21 mm |
| Weight: | 42.1 g |
RSx one10 Type-S (Low Profile, Digital, Steering Type)
The RSx one10 Type-S is designed as a budget servo with high performance specs for electric or nitro 1/10th scale vehicles. This servo comes ready to operate at 6V or 7.4V. Programming of this servo will also be available via PC for further fine tuning.
| Speed: | 0.09s@60°(7.4V) 0.10s@60°(6.0V) |
| Torque: | 10.8kg-cm(7.4V) 8.0kg-cm(6.0V) |
| Size: | 40.5 x 26 x 21 mm |
| Weight: | 51.0 g |
The BSx3 one10 Grasper is designed as a steering for electric or nitro 1/10th scale vehicles. This servo comes ready to operate at 6V or 7.4V. Model memory 1 is programmed as the power setting, Model 2 is the standard setting and the factory default. Further programming can be done via PC with ICS USB HS adapter and model memories can be changed using the Servo Model Selector both sold separately. *This servo can use HCS and requires the use of a HCS receiver when HCS is turned on in the receiver.
| Speed: | 0.11s @ 60°(7.4V) 0.13s @ 60°(6.0V) |
| Torque: | 31.6 kg-cm(7.4V) 26.3 kg-cm(6.0V) |
| Size: | 41 x 37.5 x 20 mm |
| Weight: | 70.5 g |
The RSx3 Response H.C. (Hard Case) is designed for ultimate rigidity while providing high torque and compatible with HCS. This servo comes ready to operate at 6V or 7.4V. Programming of this servo will also be available via PC for further fine tuning and includes a few pre-programmed settings. Recommended for use on steering for 1/8th off-road truggy, throttle for 1/8th off-road buggy/truggy and throttle for 1/8th on-road.
| Speed: | 0.06s @60°(7.4V) 0.07s @60°(6.0V) |
| Torque: | 17.6 kg-cm(7.4V) 14.5 kg-cm(6.0V) |
| Size: | 41 x 37.5 x 20 mm |
| Weight: | 70.5 g |
The RSx3 Response H.C. (Hard Case) is designed for ultimate rigidity while still providing high speed and compatible with HCS. This servo comes ready to operate at 6V or 7.4V.Programming of this servo will also be available via PC for further fine tuning. Recommended for use on steering for 1/8th off-road buggy, 1/8th on-road and 1/10th GP on-road.
| Speed: | 0.09s@60°(7.4V) 0.10s@60°(6.0V) |
| Torque: | 12.5kg-cm(7.4V) 11.8kg-cm(6.0V) |
| Size: | 40.5 x 26 x 21 mm |
| Weight: | 53.3 g |
The RSx3 one10 Flection is designed as a steering for electric or steerin or throttle nitro 1/10th scale vehicles. This servo comes ready to operate at 6V or 7.4V. The next core-less more draws less current allowing for less battery draw and BEC freindly but has greater holding strength. Giving you better handling performance to make turns on the track. Five model memories are set in the servo so you can select which setting benifits your requirement. Further programming can be done via PC with ICS USB HS adapter and model memories can be changed using the Servo Model Selector both sold separately. *This servo can use HCS and requires the use of a HCS receiver when HCS is turned on in the receiver. The following MODEL memories are pre-set in the servo: MODEL 1 - EP on-road (default) MODEL 2 - EP on-road carpet MODEL 3 - EP on-road low grip situations MODEL 4 - 1/10 Nitro car steering MODEL 5 - 1/10 Nitro car throttle
| Speed: | 0.08s@60°(7.4V) 0.09s@60°(6.0V) |
| Torque: | 13.3kg-cm(7.4V) 10.5kg-cm(6.0V) |
| Size: | 40.5 x 26 x 21 mm |
| Weight: | 48.0 g |
BSx3 one10 Response (Low Profile, Digital, Speed Type)
The BSx3 one10 Response is designed for electric or nitro 1/10th scale vehicles and HCS compatible. This servo comes ready to operate at 6V or 7.4V. Programming of this servo will also be available via PC or ICS setting card for the RSx for further fine tuning.
| Speed: | 0.06s @60°(7.4V) 0.07s @60°(6.0V) |
| Torque: | 17.6 kg-cm(7.4V) 14.5 kg-cm(6.0V) |
| Size: | 41 x 38 x 20 mm |
| Weight: | 65.6 g |
RSx3 Response (Digital Servo, Speed Type)
The RSx3 Response is designed to provide high speed and compatible with HCS. This servo comes ready to operate at 6V or 7.4V.
Programming of this servo will also be available via PC for further fine tuning.
Recommended for use on steering for 1/8th off-road buggy, 1/8th on-road and all 1/10th scale vehicles.
| Speed: | 0.10s@60°(7.4V) 0.12s@60°(6.0V) |
| Torque: | 17.8kg-cm(7.4V) 15.2kg-cm(6.0V) |
| Size: | 40.5 x 26 x 21 mm |
| Weight: | 48.0 g |
BSx3 one10 Power (Low Profile, Digital, Torque Type)
The BSx3 one10 Power is designed for electric or nitro 1/10th scale vehicles and HCS compatible. This servo comes ready to operate at 6V or 7.4V. Programming of this servo will also be available via PC or ICS setting card for the RSx for further fine tuning.
| Speed: | 0.11s @ 60°(7.4V) 0.13s @ 60°(6.0V) |
| Torque: | 31.6 kg-cm(7.4V) 26.3 kg-cm(6.0V) |
| Size: | 41 x 38 x 20 mm |
| Weight: | 65.6 g |
RSx3 Power (Digital Servo, Torque Type)
The RSx3 Power is designed to provide high torque and is compatible with HCS. This servo comes ready to operate at 6V or 7.4V.
Programming of this servo will also be available via PC for further fine tuning and includes a few pre-programmed settings.
Recommended for use on steering for 1/8th off-road truggy, throttle for 1/8th off-road buggy/truggy and throttle for 1/8th on-road.
| Speed: | 0.07s@60°(7.4V) 0.09s@60°(6.0V) |
| Torque: | 9.0kg-cm(7.4V) 7.0kg-cm(6.0V) |
| Size: | 41 x 25.5 x 21 mm |
| Weight: | 51.0 g |
RSx3 one10 Response (Low Profile Digital Servo, Speed Type)
The RSx3 one10 Response is designed for electric or nitro 1/10th scale vehicles and compatible with HCS. This servo comes ready to operate at 6V or 7.4V. Programming of this servo will also be available via PC or ICS setting card for the RSx for further fine tuning.
| Speed: | 0.13s@60°(6.0V) |
| Torque: | 7.5kg-cm(6.0V) |
| Size: | 33 x 26 x 15 mm |
| Weight: | 26.0 g |
RSx3-12 (Mini Servo, Digital)
The RSx3-12 is designed for electric 1/12th scale vehicles. This servo comes ready to operate at 6V or 7.4V. Programming of this servo via PC using ICS USB HS adapter and changing of model memories using the Servo Model Selector can also be performed, both units sold separately. Pre-installed model settings are as follows:
Model1: Default setting (1/12 stock class recommended)
Model2: 2014 IFMAR setting （1/12 Modified class recommend,mild
Model3: 2015JMRCA Champion（1/12 Modified class recommend, Quick
Model4: GT500, World GT, F-1 Rubber tyre class recommend
Model5: F1 form tyre, Asphalt road surface recommend
*This servo can use HCS and requires the use of a HCS receiver when HCS is turned on in the receiver.
| Speed: | 0.13s@60°(6.0V) |
| Torque: | 7.5kg-cm(6.0V) |
| Size: | 33 x 26 x 15 mm |
| Weight: | 26.0 g |
RSx3-12 (Mini Servo, Digital)
The RSx3-12 is designed for electric 1/12th scale vehicles. This servo comes ready to operate at 6V or 7.4V. Programming of this servo via PC using ICS USB HS adapter and changing of model memories using the Servo Model Selector can also be performed, both units sold separately. Pre-installed model settings are as follows:
Model1: Default setting (1/12 stock class recommended)
Model2: 2014 IFMAR setting （1/12 Modified class recommend,mild
Model3: 2015JMRCA Champion（1/12 Modified class recommend, Quick
Model4: GT500, World GT, F-1 Rubber tyre class recommend
Model5: F1 form tyre, Asphalt road surface recommend
*This servo can use HCS and requires the use of a HCS receiver when HCS is turned on in the receiver.
| Speed: | 0.13s@60°(6.0V) |
| Torque: | 7.5kg-cm(6.0V) |
| Size: | 33 x 26 x 15 mm |
| Weight: | 27.4 g |
RSx3-12 H.C. (Mini Servo, Digital)
The RSx3-12 is designed for electric 1/12th scale vehicles with an aluminum upper case for increased rigidity. This servo comes ready to operate at 6V or 7.4V. Programming of this servo via PC using ICS USB HS adapter and changing of model memories using the Servo Model Selector can also be performed, both units sold separately. Pre-installed model settings are as follows:
Model1: Default setting (1/12 stock class recommended)
Model2: 2014 IFMAR setting （1/12 Modified class recommend,mild
Model3: 2015JMRCA Champion（1/12 Modified class recommend, Quick
Model4: GT500, World GT, F-1 Rubber tyre class recommend
Model5: F1 form tyre, Asphalt road surface recommend
*This servo can use HCS and requires the use of a HCS receiver when HCS is turned on in the receiver.
| Speed: | 0.13s@60°(6.0V) |
| Torque: | 7.5kg-cm(6.0V) |
| Size: | 33 x 26 x 15 mm |
| Weight: | 26.0 g |
RSx3-12 (Mini Servo, Digital)
The RSx3-12 is designed for electric 1/12th scale vehicles. This servo comes ready to operate at 6V or 7.4V. Programming of this servo via PC using ICS USB HS adapter and changing of model memories using the Servo Model Selector can also be performed, both units sold separately. Pre-installed model settings are as follows:
Model1: Default setting (1/12 stock class recommended)
Model2: 2014 IFMAR setting （1/12 Modified class recommend,mild<
Model3: 2015JMRCA Champion（1/12 Modified class recommend, Quick
Model4: GT500, World GT, F-1 Rubber tyre class recommend
Model5: F1 form tyre, Asphalt road surface recommend
*This servo can use HCS and requires the use of a HCS receiver when HCS is turned on in the receiver.
| Speed: | 0.11s @ 60°(7.4V) 0.13s @ 60°(6.0V) |
| Torque: | 31.6 kg-cm(7.4V) 26.3 kg-cm(6.0V) |
| Size: | 41 x 37.5 x 20 mm |
| Weight: | 70.5 g |
The RSx3 Response H.C. (Hard Case) is designed for ultimate rigidity while providing high torque and compatible with HCS. This servo comes ready to operate at 6V or 7.4V. Programming of this servo will also be available via PC for further fine tuning and includes a few pre-programmed settings. Recommended for use on steering for 1/8th off-road truggy, throttle for 1/8th off-road buggy/truggy and throttle for 1/8th on-road.
| Speed: | 0.11s @ 60°(7.4V) 0.13s @ 60°(6.0V) |
| Torque: | 31.6 kg-cm(7.4V) 26.3 kg-cm(6.0V) |
| Size: | 41 x 37.5 x 20 mm |
| Weight: | 70.5 g |
The RSx Response H.C. (Hard Case) is designed for ultimate rigidity while providing high torque. This servo comes ready to operate at 6V or 7.4V. Programming of this servo will also be available via PC for further fine tuning. Recommended for use on steering for 1/8th off-road truggy, throttle for 1/8th off-road buggy/truggy and throttle for 1/8th on-road.
| Speed: | 0.11s @ 60°(7.4V) 0.13s @ 60°(6.0V) |
| Torque: | 31.6 kg-cm(7.4V) 26.3 kg-cm(6.0V) |
| Size: | 41 x 38 x 20 mm |
| Weight: | 65.6 g |
RSx3 Power (Digital Servo, Torque Type)
The RSx3 Power is designed to provide high torque and is compatible with HCS. This servo comes ready to operate at 6V or 7.4V.
Programming of this servo will also be available via PC for further fine tuning and includes a few pre-programmed settings.
Recommended for use on steering for 1/8th off-road truggy, throttle for 1/8th off-road buggy/truggy and throttle for 1/8th on-road.
| Speed: | 0.11s @ 60°(7.4V) 0.13s @ 60°(6.0V) |
| Torque: | 31.6 kg-cm(7.4V) 26.3 kg-cm(6.0V) |
| Size: | 41 x 38 x 20 mm |
| Weight: | 65.6 g |
RSx Power (Digital Servo, Torque Type)
The RSx Response is designed to provide high torque. This servo comes ready to operate at 6V or 7.4V.
Programming of this servo will also be available via PC for further fine tuning.
Recommended for use on steering for 1/8th off-road truggy, throttle for 1/8th off-road buggy/truggy and throttle for 1/8th on-road.
| Speed: | 0.08s@60°(7.4V) 0.09s@60°(6.0V) |
| Torque: | 8.2kg-cm(7.4V) 7.0kg-cm(6.0V) |
| Size: | 40.5 x 26.5 x 21 mm |
| Weight: | 48.0 g |
The RSx3 one10 Ver.D is designed specifically as a servo for 2wd drift cars. This servo comes ready to operate at 6V or 7.4V. Five model memories are set in the servo so you can select which setting benifits your requirement. Further programming can be done via PC with ICS USB HS adapter and model memories can be changed using the Servo Model Selector both sold separately. *This servo can use HCS and requires the use of a HCS receiver when HCS is turned on in the receiver. The following MODEL memories are pre-set in the servo: MODEL 1 - Easiest Operation Setting MODEL 2 - Easy Operation Setting MODEL 3 - Standard Setting (Default) MODEL 4 - Fast: Quick, need sensitive operation MODEL 5 - Expert: most quick, recommend to expert drivers
| Speed: | 0.08s@60°(7.4V) 0.09s@60°(6.0V) |
| Torque: | 8.2kg-cm(7.4V) 7.0kg-cm(6.0V) |
| Size: | 40.5 x 26.5 x 21 mm |
| Weight: | 42.1 g |
The RSx3 one10 Ver.D Lite is designed specifically as a servo for 2wd drift cars. This servo comes ready to operate at 6V or 7.4V. Less expensive version of the aluminum upper case of the Ver.D, this also do NOT have programming or model memories. The one setting is for making drifting easy and less prone to vibrating while using a gyo. Aluminum final gear, brass and plastic gears are also used. *This servo can use HCS and requires the use of a HCS receiver when HCS is turned on in the receiver.
| AGS Function: | Adjust Gain Sensor |
| PCA Function: | Priority Control Adjuster |
| EPA: | End Point Adjustement |
| Size: | 20.0 x 24.0 x 14.0 mm |
| Weight: | 8.3 g |
| Operating Voltage: | 4.8 to 7.4V |
| Input Channel: | 2ch (Steering signal: 1ch) |
The KG-X is Intelligent steering assist Gyro unit which is optimized for use with RWD drift car. Next generation Gyro system, covering all required functions for Drift cars, such as AGC function, End point adjust (each L/R ) function, PCA function, etc. *KG-X is a collaboration product with OverDose company.
AGS restrains vibration of servo!
With a conventional gyro system, servo vibrations occur when increasing gain setting. The AGC function equipped with KG-X enables to stop the vibration and operate servo normally.
Priority Control Adjuster (PCA)
The mixing ratios of the gyro signal and steering signal can be changed. Steering control performance can be obtained without feeling the use of the gyro. * If you want to use the gain setting via the transmitter, please use a 4ch transmitter.