
Features
BSx3 is the next evolution in the BSx series of servos. Taking the current BSx2 format and increasing the feeling with the added HCS functionality to achieve a linear feel and response. Best settings for use have also been added to the 5 model memories in each servo.
HCS
HCS (High speed Communcation System) is the new high speed communication system between the receiver to the servo. The HCS mode shortens communication time of the signal which is compressed. HCS compatible servos change the mode automatically by signal from receiver. So HCS compatible servos can use with all receivers. If you want to use the servos with HCS, please use with a HCS compatible receiver.

Speed: | 0.09s@60°(7.4V) 0.10s@60°(6.0V) |
Torque: | 10.8kg-cm(7.4V) 8.0kg-cm(6.0V) |
Size: | 40.5 x 26 x 21 mm |
Weight: | 51.0 g |
The BSx3 one10 Grasper is designed as a steering for electric or nitro 1/10th scale vehicles. This servo comes ready to operate at 6V or 7.4V. Model memory 1 is programmed as the power setting, Model 2 is the standard setting and the factory default. Further programming can be done via PC with ICS USB HS adapter and model memories can be changed using the Servo Model Selector both sold separately. *This servo can use HCS and requires the use of a HCS receiver when HCS is turned on in the receiver.






Speed: | 0.08s@60°(7.4V) 0.09s@60°(6.0V) |
Torque: | 13.3kg-cm(7.4V) 10.5kg-cm(6.0V) |
Size: | 40.5 x 26 x 21 mm |
Weight: | 48.0 g |
BSx3 one10 Response (Low Profile, Digital, Speed Type)
The BSx3 one10 Response is designed for electric or nitro 1/10th scale vehicles and HCS compatible. This servo comes ready to operate at 6V or 7.4V. Programming of this servo will also be available via PC or ICS setting card for the RSx for further fine tuning.





Speed: | 0.10s@60°(7.4V) 0.12s@60°(6.0V) |
Torque: | 17.8kg-cm(7.4V) 15.2kg-cm(6.0V) |
Size: | 40.5 x 26 x 21 mm |
Weight: | 48.0 g |
BSx3 one10 Power (Low Profile, Digital, Torque Type)
The BSx3 one10 Power is designed for electric or nitro 1/10th scale vehicles and HCS compatible. This servo comes ready to operate at 6V or 7.4V. Programming of this servo will also be available via PC or ICS setting card for the RSx for further fine tuning.





AGS Function: | Adjust Gain Sensor |
PCA Function: | Priority Control Adjuster |
EPA: | End Point Adjustement |
Size: | 20.0 x 24.0 x 14.0 mm |
Weight: | 8.3 g |
Operating Voltage: | 4.8 to 7.4V |
Input Channel: | 2ch (Steering signal: 1ch) |
The KG-X is Intelligent steering assist Gyro unit which is optimized for use with RWD drift car. Next generation Gyro system, covering all required functions for Drift cars, such as AGC function, End point adjust (each L/R ) function, PCA function, etc. *KG-X is a collaboration product with OverDose company.
AGS restrains vibration of servo!
With a conventional gyro system, servo vibrations occur when increasing gain setting. The AGC function equipped with KG-X enables to stop the vibration and operate servo normally.
Priority Control Adjuster (PCA)
The mixing ratios of the gyro signal and steering signal can be changed. Steering control performance can be obtained without feeling the use of the gyro. * If you want to use the gain setting via the transmitter, please use a 4ch transmitter.

