ICS 2017-05-22T19:18:38+00:00

The Future of R/C

The integration of the PC into the R/C world was bound to happen, we just decided to do it first. The EX-10 Helios, PDS programmable servo, and VFS were just the first product to benefit from the ICS system.

The leader in R/C technology. The ICS opens new doors to the R/C industry and the end user. Customizable setting that you can save to your PC and for your viewing. The number of models and setting are endless (depends on how much hard disk space is available). Download the program and try them for yourself. You will see why we are the industry leader in technology. Just click on the icon below to start downloading. You will still require the PC interface to use these programs with our products.

The following programs are freeware from Kondo Kagaku Co. Ltd. All rights reserved. Reverse engineering, analysis, remodeling, Etc. is prohibited. We do not take any responsibility due to the results that this software can result in. Downloading this software means that you agree with this statement.

ICS USB Adapter HS Driver 2015 Download here.
OS support: 32/64bit Windows Vista, Windows 7, Windows 8 and Windows 8.1 

ICS USB Adapter HS Driver 2013 Download here .
OS support: Windows 8 only .

ICS USB Adapter HS Driver 2012 Download here .
OS support: Windows XP, Windows Vista (32/64bit) and Windows 7 (32/64bit)
Please refer to the installation instructions for the manual found here .

ICS USB Adapter Driver Download for 32bit Windows here .

ICS USB Adapter Driver Download for 64bit Windows here .

 EX-2 Boot Loader Program     Update File v1.06 [English only menu and some bug fixes]     Manual for Updating v1.1
EX-2 Boot Loader software allows you to update the firmware for the EX-2 from a PC. You must download the Boot Loader software and the Update File in order to update the EX-2. Please download the manual and do not disconnect the cables while updating is in progress or the Xpansion will need to be sent in for repairs. (Requires the use of the ICS-USB Adapter HS with the 2015 driver installed and Windows 7, 8, 8.1, 10)

 EX-2 Xpansion Manager Xpansion Manager Manual
EX-2 Xpansion Manager software allows you to download your settings from the EX-2 to your PC. You can then make changes and upload them back to your EX-2 or just save the model memory data to your PC as a backup. (Requires the use of the ICS-USB Adapter HS and Windows 7, 8, 8.1, 10)

 EX-1 K.I.Y. Program Manager (requires the use of the IC-USB Adapter HS)

EX-10 Helios Program Download

BMC 2010 Software VFS-1 BMC 2010 Manager

The BMC 2010 Manager optimizes the voltage cut off settings for 1S Lipo and 2S LiFE. The included improvements in voltage cut off settings are three 1S Lipo (2.9V, 3.0V, 3.1V) and two 2S (5.0V, 6.0V) settings. The ESC timing now goes up to 12. Software functionality is similar to the previous versions and can also be used with ROAR Spec versions of the BMC for no timing settings. The Modified Version of the BMC should use this software to maximize it's potential.

VFS-1 Manager ver 2.2 Download VFS-1 Manger Instructions ver 2.2

VFS-FR Manager ver 1.0 Download VFS-FR Manager Instructions ver 1.0

Mini-Z HG Manager ver 1.1 Download Mini-Z HG Manager Instructions ver 1.1

VFS-2000 Manager Program Download

ICS Servo Manager Download
ICS Servo Manager can be used with RSx, RSx2 and BSx2 servos only.

Servo Program Download
Servo program can be used will all PDS ICS servos only.